H900f 5G Router Setup

How to make one unit H900f quickly start to work?

1. Take out SIM holder and Insert SIM Card; push back the SIM holder and make sure the two SIMs are inserted well.

2. Connect Cellular Antennas and if required also connect the Wi-Fi Antennas.

3. Connect the power using the included Mains Power Adapter via power interface.

4. Wait for 60-90 seconds for router to complete Boot UP, then connect to your PC using the Ethernet Cable into the LAN Port of the router and config PC’s LAN IP well.

5. Enter the default IP address of the router into your web browser to access the router’s user interface. Log in using the default username/password.

Kindly reminder: Once logged into the router, immediately change the default password to a secure, memorable password.

6. Check with your ISP/Carrier, obtain correct APN parameters and config well based on Web Gui–Network-Mobile . Then wait for H900f connected with 5G Cellular Network.

7. You are now ready to configure your APN Settings, Security, Wi-Fi, Port Forwarding etc. For detailed user guide or more IoT 5G Routers, just freely contact with E-Lins Communication Co., Limited.