Do You Know About CAN Bus?

When talking about vehicle networking, you must have heard about the term “CAN bus”. What is CAN bus? How does it work?

1)What is CAN bus?

“CAN bus” stands for Controller Area Network Bus (CAN bus). It is a message-based protocol for serial communications in automobiles.

In the automobile industry, for the sake of security, comfortability and convenience, a variety of electronic control units (ECUs) have been produced. More advanced vehicles usually involve greater numbers of and more sophisticated ECUs, such as engine control units, airbags, ABS, electronic fuel injection systems, etc.

Those systems vary in data types and requirements for communication reliability. To accommodate those differences needs more buses, which may lead to increased wires on board. To address the needs of reduced number of wires and large volumes of fast communications via multiple LANs, in 1986, BOSCH, a company known for developing and producing automobile electronics, developed the CAN bus protocol for vehicles. CAN bus was later standardized through ISO11898 and ISO11519, and is now a standardized protocol in Europe for vehicle networks.

2)How does CAN bus work?

Sensors installed around the vehicle are constantly monitoring the vehicle status and send the data to respective control units. For instance, data of air pressure, engine temperature, engine velocity collected by the sensors reach the control unit of the engine, which, though analysis and processing, sends commands to control the amount of fuel to be injected.

ECUs on board do not work independently. Instead, they need to share information in order to better collaborate. This implies requirements for data transmission.

Generally, communication between ECUs is carried out in two ways.

First, each single message is transmitted through independent cables. For example, if 5 signals need to be exchanged between two control units, then 5 independent cables are needed. More messages mean more wires and more pins between ECUs.

Second, all messages between ECUs are transmitted through two cables. In this way, all messages, regardless of their sizes, can move through the two cables.

Such cables are called CAN bus.

The CAN bus is a broadcast type of bus without a host computer. All nodes can “hear” all transmissions invariably and there is no way to send a message to a particular node – unless with special settings.

3)What is special about CAN bus?

Special features of in-vehicle environments lead to high requirements for usability, reliability and costs of communication systems. The CAN bus standard is widely applied in all vehicles and many other machines due to the following benefits:

Cost-Effective

As is said above, all ECUs can communicate via two CAN bus wires instead of complex analog signal lines, which reduces errors, weight, wiring and costs.

Fully centralized

The CAN bus provides ‘one point-of-entry’ to communicate with all network ECUs – enabling central diagnostics, data logging and configuration.

Extremely robust

The CAN bus system is ruggedized enough for electric disturbances and electromagnetic interference. This makes it able to be installed in a wide range of vehicles including safety critical applications.

More Efficient

Communication within the CAN bus system is prioritized by ID. Top priority data gets immediate bus access without causing interruption of others.

Easy To Install

The CAN bus is a proven standard with a rich support ecosystem, making it easily installed on various vehicles.

4) Typical CAN Bus Applications

Built with excellent control and fault detection capabilities, CAN bus is an ideal protocol for vehicle diagnostics. Actually, their adoption goes far beyond that to nearly every industry.

E-Lins, the China Best 4G Router & 5G Router Manufacturer, providing IoT 4G Router and IoT 5G Router for clients around the world. If you just need IoT or industrial routers, you can chat with E-Lins.